Reference: 1498
Device for powering non-PoE panels via a PoE switch
The SP-POE12 POE splitter is designed to power IP devices that require 12V DC through an external connector. It is useful to power non-PoE MEET devices (MIO monitors and MILO boards) through a PoE switch.
It is based on a DC/DC converter that steps down the voltage from 44-57V DC to 12V DC. The maximum output current is 1.35 A (P max = 15 W).
The output voltage (POWER) and data (DATA) enter the splitter through the RJ45 input connector, coming from a PoE device. Data (DATA) is supplied via an RJ-45 connector and 12V DC power via a DC connector.
Characteristics
| Input voltage range | 44V ÷ 57V DC |
| Current consumption | 0.32A÷0.41A |
| Output power | 15W |
| Efficiency | 84% |
| Output voltage | 12V DC |
| Output current | 1.25A |
| Ripple voltage | 150mV pp max. |
| Short-circuit protection SCP and overload protection OLP | 105% ÷ 150% of module supply power, automatic recovery |
| Optical indication: RJ45 socket with diode indicating presence of DC input voltage | - Yellow, normal status: is lit continuously, - Failure: off |
| PoE standard | IEEE 802.3af/at |
| Input power supply pairs | 1/2 (+) ; 3/6 (-) ; 4/5 (+) ; 7/8 (-) |
| Transmission speed | 10/100Mb/s Full Duplex |
| input connector | RJ-45 socket |
| Output power connector | Supply: 30cm wire + DC plug 5.5 / 2.1 |
| Operating conditions | II environmental class, -10ºC÷40ºC |
Technology: GENERICA
Weight: 0.072 kg
Measures of the packed product: 2,4x11,7x5 cm
EAN 13: 8424299014982
Technical datasheet
Documentation
